Roof Measurement Software (2026): EagleView vs Hover vs Roofr, With Real Prices

Updated November 16, 2026 · 10 min read

Disclosure: Augmented Trades participates in affiliate programs. If you click a link and make a purchase we may earn a commission at no additional cost to you. Read our full disclosure.

Short answer: for most retail roofers quoting from the truck, Roofr is the cheapest way to get roof measurement reports: $19 a report with no plan, or $13 a report on any paid plan. EagleView charges per report, from $18 for a preliminary Bid Perfect report to $32.75–$87 for a residential Premium report at its standard rates, depending on roof size. Hover builds a 3D model from photos taken with a phone. Its roof-only projects cost $29–$69 with no plan and less on its annual plans, and it is the stronger pick if you also sell siding, windows and gutters.

Prices as of November 5, 2026. Augmented Trades read every figure below from each vendor’s own pricing page that day: roofr.com/pricing, eagleview.com/pricing and hover.to/pricing. All prices are USD. None of the three is an affiliate of ours.

Roof measurement software at a glance

ToolHow it measuresCost per report or projectPlan feeBest for
RoofrAerial imagery; Roofr delivers the report, or you draw your own$19 on the free plan; $13 on any paid plan$0 (Starter) or $109–$349/moRetail roofers who want cheap reports plus proposals and a CRM in one tool
EagleViewAerial imagery; report delivered remotelyBid Perfect $18; Premium $32.75–$87 at Bronze ratesNone required (per report); EagleView One subscription is quote-onlyBidding fast, then ordering materials from a precise report
Hover3D model from phone photos, taken by you or the homeownerRoof-only: $29–$69 (Starter), $9–$49 (Pro), $39 flat (Business)$0 (Starter), $999/yr (Pro) or $2,999/yr (Business)Exterior contractors selling roof, siding, windows and gutters together

The table compares the standard published rates. EagleView, Hover and Roofr each offer lower prices through volume tiers, annual plans or sales, covered below. Plan fees are shown in the billing cycle each vendor actually uses: Hover’s paid plans are annual only.

How roof measurement software works

There are two ways these tools measure a roof without a ladder. Roofr and EagleView work from aerial imagery: you enter an address, and a report comes back with total squares, pitch and the edge lengths (ridges, hips, valleys, rakes and eaves) you need to price and order. Hover works differently. It builds a 3D model from photos taken on a phone, so someone has to be at the property, either you or a homeowner you send a scan invite to. In return, the same scan also measures siding, windows and gutters.

Measurement is only half the job. The other half is turning those numbers into a price, a proposal and a material order, and that is where the three tools differ most. Roofr is a full roofing CRM with proposals and payments. Hover adds estimates and material lists on its paid plans. EagleView sells the data and leaves the estimating to the software you already run. If you’re still choosing that software, start with our roofing contractor software guide.

Roofr pricing

Roofr sells measurement reports on every plan, including a free one, and every plan includes unlimited users. Paid plans cut the report price from $19 to $13 and add guaranteed delivery times.

PlanMonthly billingReport priceWhat you get
Starter$0/mo$19 per report (24 hours or less, estimated)Reports, 1 job board, 10 trial proposals/invoices/work orders, material ordering, ESX files at $12 per report
Measure+$109/mo (6-hour delivery) or $169/mo (2-hour)$13 per reportGuaranteed delivery, material calculations, waste factor, CSV downloads, your branding, ESX files at $10 per report
Essentials$249/mo$13 per report (2 hours or less)Unlimited proposals, invoices and work orders, card and ACH payments, unlimited e-signatures
Scale$349/mo$13 per reportEverything in Essentials plus 7 job boards, crew management, job costing, reporting and the QuickBooks integration

Annual billing: Roofr offers an annual option and advertises it as “save up to 15%.” The prices above are the month-to-month rates. Insurance work: a Roofr report bundled with an ESX file (for upload to Xactimate) costs $31 on Starter and $23 on paid plans. DIY reports: you can draw your own report on Roofr’s imagery, which Roofr suggests for blueprints, drone images or roofs under tree cover. Standard images are included on paid plans and cost $3–$4.50 each on Starter.

Add-ons (monthly billing): Instant Estimator $149/mo, which captures leads and gives homeowners a first quote (Roofr says it can be added to any plan, including the free one); AI Receptionist (beta) $99/mo; Roofr Sites (beta) $99/mo. Roofr also connects to ABC Supply, QXO and SRS for material ordering, and to CompanyCam for photos. See our contractor photo app comparison for that side.

Who it fits: retail replacement roofers who want the lowest cost per report and would rather run measurement, proposals and payments in one place than stitch tools together.

EagleView pricing

EagleView sells reports one at a time, with no subscription required. The price depends on the report type, the roof size and your rate tier. Bronze is the standard rate. Silver and Gold are lower rates that EagleView ties to prepaid plans, purchase volume, or buying through an integration partner or distributor, and Platinum is “call for pricing.”

Report (residential construction)BronzeSilverGold
Bid Perfect (preliminary roof data)$18$18$18
Premium, Small (20 sq)$32.75$27.50$24.25
Premium, Medium (40 sq)$60$54.75$49
Premium, Large (40+ sq)$87$81.25$75.50
Premium, Commercial$89.50$84.25$79
Full House (roof, walls, windows, doors)$105$98$91

The two roof products do different jobs. Bid Perfect gives you the preliminary numbers to quote: top-down and side-angle imagery, pitch distribution, facet count, total squares and a waste factor (steep-slope only). Premium is the detailed report for ordering, with totals for valleys, rakes, eaves, ridges and hips and a pitch diagram. EagleView’s own pitch is to win the bid with Bid Perfect, then upgrade to a discounted Premium report once the job is sold.

EagleView also sells EagleView One, a monthly subscription that adds 3D models, custom reports and ESX files for Xactimate. EagleView doesn’t publish its price, so treat it as quote-only. EagleView also says it integrates with roofing CRMs for ordering.

Who it fits: roofers who bid a lot of jobs they won’t all win. Paying $18 to quote and buying the full report only on sold jobs keeps measurement cost tied to revenue.

Hover pricing

Hover prices by project and by structure complexity. Its paid plans are sold annually, not monthly. The table shows Hover’s roof-only construction prices; full-exterior scans that also measure siding, windows and gutters cost more.

Roof-only projectStarter (no plan)Pro ($999/yr)Business ($2,999/yr)
Simple (up to 4 facets)$29$9$39
Average (5–8 facets)$49$29$39
Complex (9+ facets)$69$49$39
Expedited delivery (per project)$39$19$19

Starter is pay-per-project, and your first 3 projects are free. Pro takes $20 off every project and unlocks Hover’s design, estimate and agreement tools, CRM integrations, and direct material ordering with suppliers such as ABC, SRS and QXO. Business charges one flat rate per project type, whatever the complexity, and covers up to 10 branches. Enterprise is quote-only. Every plan can send data to Verisk or Cotality estimating software, and Hover has a separate price list for insurance work.

Who it fits: exterior contractors who sell more than roofs. One phone scan measures the roof, siding, windows and gutters, and Pro turns it into a branded estimate with a material list.

What 20 roofs a month would cost

To compare like with like, here is the arithmetic for 20 typical single-family roofs a month at each vendor’s published rates. This is our math from the prices above, not a vendor quote. For EagleView we used the Medium (40 sq) report, and for Hover the “average” roof-only project.

OptionReport or project fees for 20Plan fee (billed as the vendor bills it)
Roofr Starter$380 (20 × $19)$0
Roofr Measure+, 6-hour$260 (20 × $13)$109/mo
EagleView Bid Perfect only$360 (20 × $18)$0
EagleView Premium Medium, Bronze$1,200 (20 × $60)$0
Hover Starter, roof-only average$980 (20 × $49)$0
Hover Pro, roof-only average$580 (20 × $29)$999/yr
Hover Business, roof-only$780 (20 × $39)$2,999/yr

Three break-even points fall out of those prices:

  • Roofr Measure+ vs. Starter: the $6 saved per report covers the $109 plan at 19 reports a month. Below that, stay on the free plan unless you need the guaranteed 6-hour turnaround.
  • Hover Pro vs. Starter: on average roofs, the $20 saved per project covers the $999 annual fee after 50 projects a year.
  • Hover Business for roofs only: its $39 flat rate is higher than Pro on simple and average roofs, and saves only $10 on complex ones. Business earns its fee on full-exterior work, where its $79 flat rate beats Pro’s $119 on complex homes.

How to choose

  • Small retail roofing shop, under about 19 roofs a month: Roofr Starter. You pay $19 a report and nothing else, and you can grow into its proposals later.
  • Busier retail shop: Roofr Measure+ for cheaper, faster reports. If you also want proposals, e-signatures and payments, Roofr Essentials ($249/mo) includes the $13 reports.
  • You quote far more jobs than you win: EagleView Bid Perfect at $18 to quote, then a Premium report for the jobs that sell.
  • Insurance restoration: all three have an estimating path (Roofr’s ESX bundle, EagleView One’s ESX files, Hover’s Verisk/Cotality connection). The deciding question is which one your production software and your adjusters already work with, so check that before you buy.
  • Roof plus siding, windows and gutters: Hover. One scan covers the whole exterior, and Pro adds design visuals and estimates to help sell the upgrade.

Measurement tools sit next to your main platform, not in place of it. If you run AccuLynx, JobNimbus, Jobber or Housecall Pro, read roofing-specific vs. general software to see which kind of business you run. For the AI features showing up across roofing tools, see the best AI tools for roofers. Once you have the squares, our free markup vs. margin calculator checks the price before you send it.

Roof measurement software: common questions

What is the cheapest roof measurement software?

Per report, Roofr’s $13 on a paid plan, or $19 with no plan, is the lowest published price for a full report. EagleView’s $18 Bid Perfect is cheaper than a full report but gives preliminary numbers only. Hover Pro’s $9 simple-roof price is lower still, but only after the $999 annual fee.

Do I need a subscription to order roof reports?

No. Roofr’s Starter plan is free and charges per report, EagleView sells reports one at a time, and Hover’s Starter plan is pay-per-project with the first 3 projects free. Subscriptions only lower the per-report price or add features.

Can I get roof measurements into Xactimate?

Yes, by different routes. Roofr sells a report-plus-ESX bundle ($31 on Starter, $23 on paid plans). EagleView includes ESX files for Xactimate in its EagleView One subscription. Hover can send data to Verisk or Cotality estimating software on every plan.

What is the difference between EagleView Bid Perfect and Premium?

Bid Perfect ($18) gives preliminary data for a quote: total squares, pitch distribution, facet count and imagery. Premium ($24.25–$87 for residential, depending on size and rate tier) is the detailed report for ordering materials, with edge totals and a pitch diagram.

Does Hover work without visiting the property?

Hover needs photos of the building, taken in its app. You can take them yourself or send the homeowner an invite to scan, which saves a trip. Roofr and EagleView work from aerial imagery, so they don’t need anyone on site.

Sources

More for roofers: the roofing contractor hub, lead generation for roofing contractors and contractor software pricing for every vendor we track.

Disclosure: Augmented Trades participates in affiliate programs and may earn a commission if you sign up through some links on this site, at no extra cost to you. None of the tools in this article are affiliates. Full details: https://augmentedtrades.com/affiliate-disclosure/.

Not sure which tools fit your shop?

Answer a few quick questions and our free Tool Finder builds you a custom software shortlist — with the reasoning and pricing behind each pick.

Find your tools (free) →
Written by Michael

Michael is the founder of Augmented Trades, an independent site that compares AI and software tools for trade contractors on published pricing, contracts, and real feature limits. Tools are recommended on fit for your shop — affiliate partnerships never decide coverage.